1/2/2004 · Does show dot11 adjacent- ap actually work? I’ve been trying to get this to work on our IOS based AP’s running the latest image, but none of our AP’s see any adjacent ones (several dozen AP’s spread out over multiple geographic areas).
1/2/2004 · Does show dot11 adjacent-ap actually work? I’ve been trying to get this to work on our IOS based AP’s running the latest image, but none of our AP’s see any adjacent ones (several dozen AP’s spread out over multiple geographic areas).
10/30/2020 · show dot11 carrier busy. show dot11 directed-roam. show dot11 ids eap. show dot11 ids mfp. show dot11 neighbor-ap. show dot11 network-map. show dot11 statistics client-traffic. show dot11 traffic-streams. show dot11 vlan-name. show dot1x. show dot1x credentials. show eap registrations. show eap sessions. show environment. show file information . show file systems. show .
10/30/2020 · show dot11 cac. Displays admission control information for the access point. traffic-stream. Configures CAC traffic data rates and priorities for a radio interface on the access point. debug cac. Provides CAC admission control debugging information for on the access point.
show debugging show dhcp server show dot11 aaa authentication mac-authen filter-cache show dot11 adjacent-ap show dot11 associations show dot11 bssid show dot11 cac, show dot11 adjacent-ap. 2-131. 2-132. 2-133. 2-135. 2-134. vi. Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges. OL-5261-01. Contents. show dot11 associations show dot11 carrier busy show dot11 network-map. show dot11 statistics client-traffic. show environment. show iapp rogue-ap-list.
3/17/2015 · The show dot11 adjacent-ap frame does not display any information about the access point to which the client adapter was previously associated. This issue is resolved in driver 2.0. • CSCin74956 and CSCee69323—Client fails to get IP address when CCKM CKIP+CMIC is.
4/11/2013 · and to show the associations for the wireless access point: # show dot11 ? # show dot11 association # show dot11 statistics client-traffic. and for associated access points: # show dot11 adjacent-ap 2.5.9 Speed. In some network it is necessary to define the transmission speeds for the nodes, especially to limit their transmission rates.
Does show dot11 adjacent-ap actually work? by Craig Norborg on ?11-16-2020 08:01 PM Latest post on ?04-02-2004 07:18 AM by Mark3000 3 Replies 1742 Views
